LTE Advanced signal indicator in AndroidLTE Advanced signal indicator on Xiaomi phonesLTE Advanced signal indicator (4G+) on SamsungGalaxy phones in Europe
LTE Advanced (LTE+, LTE-A;[1] on Samsung Galaxy and Xiaomi phones — 4G+) is a mobile communication standard and a major enhancement of the Long Term Evolution (LTE) standard. It was formally submitted as a candidate 4G to ITU-T in late 2009 as meeting the requirements of the IMT-Advanced standard, and was standardized by the 3rd Generation Partnership Project (3GPP) in March 2011 as 3GPP Release 10.[2]
Cellular network standards and generation timeline.
The LTE+ format was first proposed by NTT DoCoMo of Japan and has been adopted as the international standard.[3]
The work by 3GPP to define a 4G candidate radio interface technology started in Release 9 with the study phase for LTE-Advanced. Being described as a 3.9G (beyond 3G but pre-4G), the first release of LTE did not meet the requirements for 4G (also called IMT Advanced as defined by the International Telecommunication Union) such as peak data rates up to 1 Gb/s. The ITU has invited the submission of candidate Radio Interface Technologies (RITs) following their requirements in a circular letter, 3GPP Technical Report (TR) 36.913, "Requirements for Further Advancements for E-UTRA (LTE-Advanced)."[4] These are based on ITU's requirements for 4G and on operators’ own requirements for advanced LTE.
Major technical considerations include the following:
Continual improvement to the LTE radio technology and architecture
Scenarios and performance requirements for working with legacy radio technologies
Backward compatibility of LTE-Advanced with LTE. An LTE terminal should be able to work in an LTE-Advanced network and vice versa. Any exceptions will be considered by 3GPP.
Consideration of recent World Radiocommunication Conference (WRC-07) decisions regarding frequency bands to ensure that LTE-Advanced accommodates the geographically available spectrum for channels above 20 MHz. Also, specifications must recognize those parts of the world in which wideband channels are not available.
Likewise, 'WiMAX 2', 802.16m, has been approved by ITU as the IMT Advanced family. WiMAX 2 is designed to be backward compatible with WiMAX 1 devices. Most vendors now support conversion of 'pre-4G', pre-advanced versions and some support software upgrades of base station equipment from 3G.
The mobile communication industry and standards organizations have therefore started work on 4G access technologies, such as LTE Advanced.[when?] At a workshop in April 2008 in China, 3GPP agreed the plans for work on Long Term Evolution (LTE).[5] A first set of specifications were approved in June 2008.[6] Besides the peak data rate 1 Gb/s as defined by the ITU-R, it also targets faster switching between power states and improved performance at the cell edge. Detailed proposals are being studied within the working groups.[when?]
Three technologies from the LTE-Advanced tool-kit – carrier aggregation, 4x4 MIMO and 256QAM modulation in the downlink – if used together and with sufficient aggregated bandwidth, can deliver maximum peak downlink speeds approaching, or even exceeding, 1 Gbit/s. Such networks are often described as ‘Gigabit LTE networks’ mirroring a term that is also used in the fixed broadband industry.[7]
Proposals
The target of 3GPP LTE Advanced is to reach and surpass the ITU requirements. LTE Advanced should be compatible with first release LTE equipment, and should share frequency bands with first release LTE. In the feasibility study for LTE Advanced, 3GPP determined that LTE Advanced would meet the ITU-R requirements for 4G. The results of the study are published in 3GPP Technical Report (TR) 36.912.[8]
One of the important LTE Advanced benefits is the ability to take advantage of advanced topology networks; optimized heterogeneous networks with a mix of macrocells with low power nodes such as picocells, femtocells and new relay nodes. The next significant performance leap in wireless networks will come from making the most of topology, and brings the network closer to the user by adding many of these low power nodes – LTE Advanced further improves the capacity and coverage, and ensures user fairness. LTE Advanced also introduces multicarrier to be able to use ultra wide bandwidth, up to 100 MHz of spectrum supporting very high data rates.
In the research phase many proposals have been studied as candidates for LTE Advanced (LTE-A) technologies. The proposals could roughly be categorized into:[9]
Support for relay node base stations
Coordinated multipoint (CoMP) transmission and reception
UE Dual TX antenna solutions for SU-MIMO and diversity MIMO, commonly referred to as 2x2 MIMO
Scalable system bandwidth exceeding 20 MHz, up to 100 MHz
Within the range of system development, LTE-Advanced and WiMAX 2 can use up to 8x8 MIMO and 128-QAM in downlink direction. Example performance: 100 MHz aggregated bandwidth, LTE-Advanced provides almost 3.3 Gbit peak download rates per sector of the base station under ideal conditions. Advanced network architectures combined with distributed and collaborative smart antenna technologies provide several years road map of commercial enhancements.
The 3GPP standards Release 12 added support for 256-QAM.
A summary of a study carried out in 3GPP can be found in TR36.912.[10]
Timeframe and introduction of additional features
An LTE Advanced base station installed in Iraq for provisioning of broadband wireless Internet service
Original standardization work for LTE-Advanced was done as part of 3GPP Release 10, which was frozen in April 2011. Trials were based on pre-release equipment. Major vendors support software upgrades to later versions and ongoing improvements.
In order to improve the quality of service for users in hotspots and on cell edges, heterogeneous networks (HetNets) are formed of a mixture of macro-, pico- and femto base stations serving corresponding-size areas. Frozen in December 2012, 3GPP Release 11[11] concentrates on better support of HetNet. Coordinated Multi-Point operation (CoMP) is a key feature of Release 11 in order to support such network structures. Whereas users located at a cell edge in homogenous networks suffer from decreasing signal strength compounded by neighbor cell interference, CoMP is designed to enable use of a neighboring cell to also transmit the same signal as the serving cell, enhancing quality of service on the perimeter of a serving cell. In-device Co-existence (IDC) is another topic addressed in Release 11. IDC features are designed to ameliorate disturbances within the user equipment caused between LTE/LTE-A and the various other radio subsystems such as WiFi, Bluetooth, and the GPS receiver. Further enhancements for MIMO such as 4x4 configuration for the uplink were standardized.
The higher number of cells in HetNet results in user equipment changing the serving cell more frequently when in motion.
The ongoing work on LTE-Advanced[12] in Release 12, amongst other areas, concentrates on addressing issues that come about when users move through HetNet, such as frequent hand-overs between cells. It also included use of 256-QAM.
First technology demonstrations and field trials
This list covers technology demonstrations and field trials up to the year 2014, paving the way for a wider commercial deployment of the VoLTE technology worldwide. From 2014 onwards various further operators trialled and demonstrated the technology for future deployment on their respective networks. These are not covered here. Instead a coverage of commercial deployments can be found in the section below.
[13] The operator announced the completion of a 4G trial where it achieved a maximum packet transmission rate of approximately 5 Gbit/s in the downlink using 12 transmit and 12 receive antennas and 100 MHz frequency bandwidth to a mobile station moving at 10 km/h.
[17] The operator trialed LTE-Advanced with Nokia Networks and combined 1.8 GHz spectrum and 700 MHz spectrum. Vodafone achieved just below 300 Mbit/s.
[25] The operator trialed LTE-Advanced in London with Chinese vendor Huawei and combined 20 MHz of 1.8 GHz spectrum and 20 MHz of 2.6 GHz spectrum. EE achieved 300 Mbit/s which is equal to category 6 LTE.
[26] The operator trialed LTE-Advanced in Munich with Chinese vendor Huawei and combined 10 MHz of 800 MHz spectrum and 20 MHz of 2.6 GHz spectrum. O2 achieved 225 Mbit/s.
[28] The operator trialed LTE-Advanced in Dresden with Swedish vendor Ericsson and combined 10 MHz of 800 MHz spectrum and 20 MHz of 2.6 GHz spectrum. Vodafone achieved 225 Mbit/s.
[29] The operator trialed LTE-Advanced with Swedish vendor Ericsson and combined 20 MHz of 1.8 GHz spectrum and 20 MHz of 2.6 GHz spectrum. Telstra achieved 300 Mbit/s which is equal to category 6 LTE.
[30] The operator trialed TD-LTE-Advanced with Chinese vendor Huawei and combined two 20 MHz channels of 2.3 GHz spectrum. Optus achieved over 160 Mbit/s.
[33] The operator launched the first 4.5G on LTE-U/LAA network in Bangkok with the combination of 1800 MHz spectrum and 2100 MHz spectrum using Carrier Aggregation (CA), 4x4 MIMO, DL256QAM/UL64QAM and the use of LTE-Unlicensed (LTE-U) to facilitate high-speed network. AIS achieved download speed up to 784.5 Mbit/s and upload speed 495 Mbit/s.[34] This was made possible by Joint Development Center (JIC) the special R&D program between AIS and Huawei.
[35] The operator trialed LTE-Advanced in Tbilisi and combined the 800 MHz with its existing 1800 MHz spectrum. MagtiCom achieved download speed 185 Mbit/s and upload speed 75 Mbit/s.
[37] The operator launched LTE-Advanced in 12 cities across Kazakhstan. Altel achieved 225 Mbit/s download speed. LTE-Advanced (4G+) Technology is up to be launched in 5 more cities in Kazakhstan in May 2017.
[39] The operator first tested their LTE-A network in May 2017 over the 3.5 GHz band, and it was then made officially available in Lahore, Pakistan, with more cities to follow. Wi-Tribe achieved speeds of up to 200 Mbit/s over their new LTE-A network. This was done using equipment from Huawei.
On 10 April 2012, Airtel launched 4G services through dongles and modems using TD-LTE technology in Kolkata, becoming the first company in India to offer 4G services. The Kolkata launch was followed by launches in Bangalore (7 May 2012), Pune (18 October 2012), and Chandigarh, Mohali and Panchkula (25 March 2013).
Deployment
The deployment of LTE-Advanced is in progress in various LTE networks.
In August 2019, the Global mobile Suppliers Association (GSA) reported that there were 304 commercially launched LTE-Advanced networks in 134 countries. Overall, 335 operators are investing in LTE-Advanced (in the form of tests, trials, deployments or commercial service provision) in 141 countries.[41]
LTE Advanced Pro (LTE-A Pro, also known as 4.5G, 4.5G Pro, 4.9G, Pre-5G, 5G Project)[42][43][44][45] is a name for 3GPP release 13 and 14.[46][47] It is an evolution of LTE Advanced (LTE-A) cellular standard supporting data rates in excess of 3 Gbit/s using 32-carrier aggregation.[48] It also introduces the concept of License Assisted Access, which allows sharing of licensed and unlicensed spectrum.
Additionally, it incorporates several new technologies associated with 5G, such as 256-QAM, Massive MIMO, LTE-Unlicensed and LTE IoT,[49][50] that facilitated early migration of existing networks to enhancements promised with the full 5G standard.[51]
^Agilent "Archived copy"(PDF). Archived from the original(PDF) on 2011-03-03. Retrieved 2011-07-28.{{cite web}}: CS1 maint: archived copy as title (link), Introducing LTE-Advanced, p. 6 , March 8, 2011, accessed July 28, 2011.
